Far Out Kids Banner Information site for sheltie fan of Japan.
Home − Contents − Method of correcting ear.
 Contents item Diary and updated information
 About Us
 Our Kennel

 Method of correcting ear.
 (This page)

 My Favorite Sheltie
 ASSA Results
 Japan Pedigree Award
 Sheltie's coat color.
 World Sheltie Link
 Free Web Graphics
(The distribution is stopping.)
 I welcome E-mail from you.

Method of correcting ear.

The correction method of the ear which is done in Japan.
Figure from which ear stands First, it is English which isn't perfect. Permit a mistake.
It plays an active part by the show in Japan Most of sheltie are correcting an ear.
It has a standing ear just as it is sheltie Being.
Also, it has a completely falling ear It is about sheltie, too.
Using the tape, it moves an ear to the topping part of the head.
After that, it lays 1/3 of the ear with the tape.
The tape which is often used in Japan is a tape with the name which is
called " Nitiban made u-tokuban ".
The amount of money of one tape can be bought at Japan at 500 yen.
( At the America dollar, it is 5 dollars ).
However, a lot of bleeders are worried.
This tape became a manufacturing stop.
The newly sold tape had changed to the one about which the adhesion power is weak.
Also, it is doing these tapes very stickily and it is the medicine which is called
" The ethyl ether " that it uses when taking them.
It orders The ethyl ether at the pharmacy and in Japan, it obtains it.
Also, then, the purpose of the use can be asked.
A lot of friends can correct an ear very well in this way.
However, it isn't possible to make me correct an ear in this way.
Always, to become a twisted ear and to fail can not recoup a lot of failure of me.
I am always looking for the way of correcting a succeeding ear.
●It is a way of cutting a tape.
1. From the preparation of the tape.
1st step. It is six sheets in the cutting in the 10 inch length.
2nd step It is two sheets in the cutting in the 5 inch length.
3rd step. It is one sheet in the cutting in the 37.5 inch length.
4th step. It is two sheets in the tape with the length of 12.5 inches - 17.5 inches.
2. Next, it does workmanship to the tape.
1. It cuts off a corner like the figure in two sheets out of the tape of 1st step. ( Right figure reference )  
2. The tape of 2nd step is 3rd step It makes connect.
3. It cuts the tape of 3rd step in the vertical half like figure. (It becomes attenuate long.)
4. It uses the tape of 4th step to lay the tip of the ear in 1/3, making a ring.
3. It does workmanship to tape both which made two in 3rd step.( Right figure reference )
It doesn't set 3.75 inches of either the tip. The part of the remainder pastes a gluing surface each other.
It cuts off the part which painted the black of the part to stick each other to become a string.
It extracts the root of 3.75 inches of the tip not to be setting. ( Right figure reference )
4. It is 3rd on the tape of 2nd step. It sets the tape of step.
It becomes difficult when once turning the part which made a string to the
adhesion surface in addition to setting at this time to come.
5. Is it possible to have done a set like the figure on the right?
The pasting and going step is as in the number which was written in the figure.
Was the tape in a right picture able to be set?
The pasting order is as shown in figure.
●Ear set pasting volume
It pastes a tape as in the order of the picture.
Step1. 
It pastes a tape diagonally with the ear like the right figure. Figure of the tape in the ear where one was pasted.
Step2.
It pastes the following tape to the side like the right figure. Figure of the tape in the ear where two was pasted.
Step3.
It sees the right figure and it uses up scissors and it takes the top of the dotted line. Figure in the line where the tape is cut after pasting two in the ear.
Step4.
The cut form becomes the right figure. Figure in the ear where the tape was cut after two is pasted.
Step5. 
It pastes the tape of No.3 which was set by C for the side. Figure where tape of three was pasted
Step6. 
It pastes No.4 up because No.2 and the No.3 tape don't come off. Figure where tape 4 was pasted so that tape of three should not peel off
Step7. 
It uses the tape of 4th step.
It makes the surface which was stickily a table and it makes a ring.
It is the tape of No.5.
It pastes it onto No.4.
Figure where looped tape was pasted
Step8. 
It sticks the tape and the ear 1/3 of which is pasted to the ear in
No.5 and it is possible to put them.
Figure in state to bend ear
Step9. 
It pastes both ears, a tape. Figure where tape was pasted to both ears
Step10. 
It ties a string of No. 3.
Figure where tape of both ears was connected
Completion !! to be in this
It was explained to understand while seeing a picture.
It is very difficult to explain in English.
Permit if not finding a meaning.
Gratitude !!
Completed chart
The person whom the making person doesn't permit must not copy and use the contents and the picture of this page.
↑TOP
 To print by the A4 length size, this site is made.
copyright(C) 1997-2008 by.Pepsi(Far Out Kids Shelties) all right reserved.